Type
- Washable Pure Acrylic Emulsion with a Satin Finish.
Appearance
Surface Preparation
- Essential for good paint performance is a sound substrate that has been properly cleaned and prepared. On existing painted
surfaces to be redecorated, a small section of paint must be removed to establish the condition of the original paint and the
substrate. Where there is doubt, the paint must be removed to a sound base.
Surface Preparation
- Essential for good paint performance is a sound substrate that has been properly cleaned and prepared. On existing painted
surfaces to be redecorated, a small section of paint must be removed to establish the condition of the original paint and the
substrate. Where there is doubt, the paint must be removed to a sound base.
1. New Unpainted Wall Surfaces
e.g. Interior and exterior one coat plaster and interior two coat plaster (Cretestone) surfaces.
- (a) 1st coat: Titanium Ti-Nyl Masonry Primer.
- (b) 2nd and 3rd coat: Titanium Ti-Dek Satin.
2. Old Painted Areas e.g. Interior and exterior one coat plaster.
- (a) Remove fungus growth, dust, loose and flaky material from the surface by means of a high pressure water jet. Allow the surface to dry properly.
- (b) 1st application: Titanium Anti-Fungus Wash and allow to dry for 24 hours.
- (c) Fill imperfections with Titanium Ti-Fill. Note: The use of cellulose fillers could result in dull patches in the finished paint film and premature failure of the system.
- (d) 1st coat: Spot-prime with Titanium White Masonry Primer.
- (e) 2nd and 3rd coat: Titanium Ti-Dek Satin.
Application Method : Brush, roller or airless spray.
Spreading Rate : ± 10m² per litre per coat on very smooth surfaces.
Cleaning of Utensils : Wash immediately after use with warm soapy water.
Packaging Sizes : 20 L, 5 L and 1 L
Colour Range : White and a variety of standard colours or any other Tint.
Download Product Data Sheet
Ti-Dek Satin Data Sheet.pdf
